Brushes for Maintenance
Drag mat
Shovel
Air Lance
- Weight: 10 kilogram
- Working with: 0,55 meter
- Air flow (if needed): 10 cubic meter a minute at 10 bar minimum.
The Air Lance is a hand tool that is ideal for removing all infill out of small areas and sides of any artificial grass surfaces.
Infillcair (with various options)
- Weight: 820 kilogram
- Working with:1,4 meter
- Connection: 3 piont hitch of a tractor with minimum 1100 kilogram lift capacity
- Power required: minimum 20 HP
- PTO: PTO of tractor at maximum 540 RPM.
- Hydraulic: 25 liter per minute at 100 bar
- Air flow (if needed): 12 cubic meter a minute at 10 bar minimum.
The Infillcair can remove any kind of infill ( up to 95 % ) with or without the use of compressed air. Without damaging the artificial turf.
- In combination with the big bag trollies you are able to put the infill into 1000 liter big bags.
- In combination with the tipping bins you are able to dump the infill on a pile, containers/skips.
Option 1: Big Bag Grass Trollies
With the big bag trollies you are able to operate the Infillcair nonstop. One operator takes care of the big bags and the second operator operates the Infillcair nonstop due to the big bags trollies that are being dragged aside of the Infillcair.
Connection bar/rail required to drag the big bag trollies aside of the infillcair. Bar/rail comes including 5 water spray nozzles for dustcontrol Same Rail can be used for the tipping bins as well as the big bag trollies.
Option 2: Tipping bins
With the tipping bins you can tip the material that you remove with the Infillcair into any kind of container or dump it next to your worksite for further use. Ideal if the removed material does not have to be stored in big bags.
Connection rail required to drag the big bag trollies aside of the Infillcair. Rail comes including 5 water spray nozzles for dust control Same Rail can be used for the tipping bins as well as the big bag trollies.
A.G. Beater 4300
- Weight: 4400 kilogram
- Working with: 4,2 meter
- Connection: 3 point hitch of a tractor with minimum 1500 kilogram lift capacity
- Power required: minimum 40 HP
- PTO: PTO of tractor at maximum 540 RPM.
- Hydraulic: 25 liter per minute at 150 bar
The Beater 4300 is a compact machine that can remove all infill and roll up the turf at 4.1m wide. This machine is ideal for re-installation of a full size artificial grass pitch.
A.G. Beater 2400
- Weight: 2400 kilogram
- Working with: 2.3 meter / 8 feet
- Connection: 3 point hitch of a tractor with minimum 1200 kilogram lift capacity
- Power required: minimum 35 HP
- PTO: PTO of tractor at maximum 540 RPM.
- Hydraulic: 25 liter at 150 bar
The Beater 2400 is a compact machine that can remove all infill and roll up the artificial grass at 2.3 m wide. This machine is ideal for re-installation of a full size artificial grass pitch.
Double Big Bag Carrier 2500
- Weight: 150 kilogram
- Loading Capacity: two standard big bags of 1000 liter at 2500 kilogram total
- Connection: 3 piont hitch of a tractor
- Power required: minimum 20 HP
- PTO: Not required.
- Hydraulic: Double acting valve at max 130 bar
The Double big bag carrier can be used a side of the beaters for bagging up any kind of infill into 1000 liter big bags. It can be pulled behind any kind of tractor to carry two big bags at once, with a maximum loading capacity of 2500 kilogram.
Turfscratcher 1600
- Weight: 180 kilogram
- Working with: 1,6 meter
- Connection: 3 piont hitch of a tractor
- Power required: minimum 20 HP
- PTO: PTO of tractor at maximum 540 RPM.
- Hydraulic: Not required
The Turfscratcher is an ideal machine for decompaction of any kind of infill material in any kind of artificial turf. The rotating tines break open the compacted material.
A.G. Clamp Hydraulic
- Weight: 155 kilogram
- Capacity: 4 meters wide strips with 45 millimeter of infill half sand half SBR
- Connection: 3 piont hitch of a tractor
- Power required: 35 hp tractor
- Hydraulic: 20 liter a minute at 120 bar minimum
This clamp is ideal for dragging away strips of artificial grass up to 4 meters wide including all infill material. It is an ideal machine to use next to the A.G.Beater for dragging away strips of turf from a fence, boarding or a wall next to a pitch. It can be connected to a forklift or bobcat etc. of in the three point linkage of a standard tractor.
A.G. Cutter Self Propelled
- Weight: 75 kilogram
- Capacity: up to 300 meter in one hour
- Power required: 16 hp petrol engine
This artificial grass is ideal to cut artificial grass with infill or without infill. It is quick and simple to operate and will not damage the subbase. The cutter is self-propelled so there is no need for the use of other machines. Standard the machine comes with a cutting knife. Option is a rotating cutting blade (only ideal for cutting artificial grass without infill).
A.G. Cutter Tractor Hitch type
- Weight: 35 kilogram
- Capacity: up to 600 meter in one hour
- Power required: 16 hp tractor with three point hitch
- Hydraulic: 25 liter a minute at 120 bar minimum
This artificial grass cutter is ideal to cut artificial grass with infill or without infill. It is quick and simple to operate and will not damage the subbase. The cutter is heavy duty and fits behind all tractors that have a 3 point hitch Standard the machine comes with a solid easy to change cutting knife. Option is a rotating cutting blade (only ideal for cutting artificial grass without any infill).